Solar Light
Solar Road Light
All-in-one solar street light for roads and highways.
- All-in-one designPV panel, LiFePO4 battery and LED in a single fixture
- Smart controlPIR motion sensor + dusk-to-dawn photocell
- Long autonomy3-5 rainy days backup with LiFePO4 battery
- No trenchingGrid-free installation, no electrician required
| Power | 30W – 200W |
|---|---|
| Battery | LiFePO4 |
| Height | 6 – 12m |
| Feature | All-in-one |
Product Introduction
The EverPeak solar road light is an all-in-one outdoor lighting solution that integrates a monocrystalline PV panel, a high-capacity LiFePO4 battery, and a high-lumen LED module into a single corrosion-resistant aluminum housing. It delivers reliable street, pathway and parking-lot illumination without any grid connection or trenching work.
A built-in intelligent controller manages dusk-to-dawn operation and PIR motion detection, automatically dimming to 30% on standby and boosting to 100% when movement is detected, which dramatically extends nightly runtime and battery life.
Each unit is pre-wired and factory-configured; installers simply fix the pole bracket and tilt the panel to local latitude. Optional remote monitoring reports battery state-of-charge and fault codes for large municipal deployments.
Main Features
- Monocrystalline PV panel with ≥21% efficiency
- Bridgelux or equivalent LED, 3600-12000 lm output
- LiFePO4 battery, 3-5 days autonomous operation
- IP65 waterproof die-cast aluminum housing
- Microwave / PIR motion sensor plus photocell
- Over-charge, over-discharge and reverse-polarity protection
Specifications
| Model | LED Power | Lumens | Battery | Panel | Pole Height |
|---|---|---|---|---|---|
| EP-SL30 | 30W | 3600 lm | 12.8V 18AH | 50W | 4-5 m |
| EP-SL60 | 60W | 7200 lm | 12.8V 24AH | 80W | 5-6 m |
| EP-SL100 | 100W | 12000 lm | 12.8V 42AH | 120W | 6-8 m |
Item Details
Working Principle
- Solar charge
- Daylight charges the battery through the top-mounted panel.
- Controller
- MPPT controller regulates charge and discharge safely.
- LED drive
- Photocell + PIR switch the LED between dim and full modes.
Installation
- Pole height
- Match pole height to road width and required lux level.
- Tilt
- Set panel tilt to local latitude for best annual yield.
- Spacing
- Space fixtures 2-3× pole height apart for even coverage.
Quality Assurance
- IP test
- Every housing passes IP65 water-jet certification.
- Battery cycle
- LiFePO4 cells validated for 2000+ charge cycles.
- Salt spray
- Anti-corrosion treatment for coastal deployment.
Core Application Scenarios
- 01Urban streets and avenues
- 02Rural village roads
- 03Parking lots and campuses
- 04Highway rest areas
Get a Quote for This Product
Tell us your required quantity and destination port — we will send a detailed quotation within 24 hours.
