Solar Panel
P-type 210 Mono-Facial Solar Module
P-type 210mm mono-facial module.
- Cell TechnologyP-Type mono PERC, 210mm wafer
- Power Range650 W – 670 W
- Module EfficiencyUp to 21.58%
- Warranty12-year product / 25-year power
| Power | 550W – 600W |
|---|---|
| Cell Type | P-type 210 mono |
| Efficiency | Up to 21.6% |
| Warranty | 25 years |
Product Introduction
This module combines the cost maturity of P-type PERC with the large 210mm wafer format, fitting 132 half-cut cells into a 2384 × 1303 mm laminate for 650–670 W of output per panel. It is the lowest-cost route to high per-module wattage.
The commercial logic is straightforward: at 660 W, a 1 MW array needs roughly 1,515 modules instead of about 1,870 with 535 W panels. That is 355 fewer modules to ship, unload, lift, clamp and wire — a measurable saving in freight volume, mounting hardware, labour hours and connector count.
A mono-facial white backsheet keeps cost and weight down. Because the current is higher on the 210 platform, verify your inverter string input current rating and DC fuse sizing at the design stage — the module is rated for a 30 A series fuse.
Main Features
- 210mm large format delivers up to 670 W per module at PERC pricing — the cheapest path to high wattage.
- Fewer modules per MW cuts freight volume, mounting hardware, connectors and installation labour.
- Half-cut cells with low-resistance multi-busbars control I²R loss despite the higher operating current.
- Reinforced anodised aluminium frame rated 5400 Pa front / 2400 Pa rear.
- PID-resistant encapsulation, certified to IEC 61215 / IEC 61730 with salt-mist and ammonia resistance.
- 25-year linear power warranty, ≥ 84.8% guaranteed output at year 25.
Specifications
| Model | Pmax (W) | Efficiency (%) | Vmp (V) | Imp (A) | Voc (V) | Isc (A) |
|---|---|---|---|---|---|---|
| EP-PM210-650 | 650 | 20.94 | 37.65 | 17.27 | 45.15 | 18.32 |
| EP-PM210-655 | 655 | 21.10 | 37.80 | 17.33 | 45.30 | 18.38 |
| EP-PM210-660 | 660 | 21.26 | 37.95 | 17.39 | 45.45 | 18.44 |
| EP-PM210-665 | 665 | 21.42 | 38.10 | 17.45 | 45.60 | 18.50 |
| EP-PM210-670 | 670 | 21.58 | 38.25 | 17.52 | 45.75 | 18.56 |
Item Details
Cell & Electrical Data (STC)
- Cell Type
- P-Type monocrystalline PERC
- Cell Size / Layout
- 210mm × 105mm, 132 half-cut cells
- Maximum System Voltage
- 1500 V DC (IEC)
- Maximum Series Fuse Rating
- 30 A
- Power Tolerance
- 0 ~ +5 W
- Design Note
- Verify inverter string input current before sizing
Mechanical Parameters
- Dimensions (L × W × H)
- 2384 × 1303 × 35 mm
- Weight
- 33.0 kg
- Front Glass
- 3.2mm anti-reflective coated tempered glass
- Backsheet
- White composite backsheet (mono-facial)
- Frame
- Reinforced anodised aluminium alloy
- Junction Box
- IP68 rated, 3 bypass diodes
- Handling Note
- Two-person lift recommended
Temperature, Ratings & Warranty
- Temperature Coefficient of Pmax
- −0.35 %/°C
- Temperature Coefficient of Voc
- −0.275 %/°C
- Operating Temperature Range
- −40 °C ~ +85 °C
- Mechanical Load (Front / Rear)
- 5400 Pa / 2400 Pa
- Certification
- IEC 61215 / IEC 61730, salt mist, ammonia
- Product Warranty
- 12 years
- Power Output Warranty
- 25 years linear, ≥ 84.8% at year 25
Core Application Scenarios
- 01Large ground-mount plants where module count and installation labour dominate cost
- 02Industrial rooftops with long clear rail runs and crane or hoist access
- 03EPC tenders that specify high per-module wattage at PERC price levels
- 04Projects with limited land where DC capacity per hectare must be maximised on a budget
Get a Quote for This Product
Tell us your required quantity and destination port — we will send a detailed quotation within 24 hours.
